Roofing Nailer - Air - Hitachi NV 45 AB2
Rental Rates
Description
- The NV45AB2 Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards.
- This nailer uses from 7/8" to 1 3/4" nails.
- We sell 1 1/4 inch nails by the coil or by the box. These are the right length for many jobs using a single layer of shingles.
- There are anywhere from 66 to 90 3-tab shingles per square (depending on style, size, weight, etc.).
- There are typically 3 bundles per square.
- A square of shingles covers 100 square feet.
- Fiqure an average of 4 coils (at 120 nails per coil) to complete a square (based on 6 nails in 2 rows per 3-tab shingle).
Features
- Coil, Wire Collation
- 7/8" - 1 3/4" x .120
- Steel & rubber body protectors
- "New" side-load magazine
- Tool-less depth of drive adjustment for precision nailing
- Carbide tipped push lever to reduce wear
- Rubber safety valve covering resists dirt and tar
- Nail capacity of 120 nails
- Operating air pressure of 70-120 PSI
- Air consumption of .046 ft. cubed per cycle at 100 PSI
- 3/8? Air Inlet and Dimensions of 9 27/32" x 4 5/8" x 10 3/8"
- Optional Accessory: Single Trip Trigger Mechanism (878226)